Red Plywood Board
The cost-effective formwork panel for walls, slabs and columns — red-dyed face, combi core, WBP glue, export packing.
What it is
A red-dyed faced plywood panel built for general concrete formwork. The face takes a smooth finish against concrete, the core carries the load, and the panel survives handling on site without delaminating at the edges.
| Size | 2440 × 1220 mm (8 × 4 ft) |
| Thickness | 12 / 15 / 18 / 20 mm |
| Face and back | Red-dyed decorative film, smooth |
| Core | Combi core: eucalyptus, pine, fir |
| Glue | WBP melamine, water-resistant |
| Moisture content | 8–12 % |
| Thickness tolerance | ±0.5 mm |
| Hot pressing | Two-stage at 130 °C |
| Packing | Steel-strapped wooden pallets |
| Loading port | FOB Xiamen |
Pcs per 40HQ
| Thickness | Pcs / 40HQ |
|---|---|
| 12 mm | 1,400 |
| 15 mm | 1,200 |
| 18 mm | 930–960 |
| 20 mm | On request |
Where it is used
Wall formwork, slab formwork, column formwork, residential and commercial construction, and general shuttering where cost per pour matters more than reuse count.
Lower cost per panel than film-faced, for projects that do not need a black phenolic face.
Same combi core and WBP glue as our film-faced line — the core is not downgraded.
Red face releases cleanly and is easy to inspect for wear between pours.
Available in the same container mix as film-faced boards.